Archive for December, 2011

Efficient Plumbing with PEX Manifolds

Dec 6

Posted by Edmundo Plumber in PEX Manifolds, PEX Tubing & Pipe | Comments off

Plumbing system plays an important role in both commercial and residential building. If you do not have a good quality plumbing system at your home, you may have to face numerous hassles in the future. Basically, there are different types of plumbing systems available in the market, which you can install at your home. You can use steel pipes or copper pipes. However, these days, most of the people are opting for PEX plumbing systems due to the amazing features it holds. PEX pipes are very flexible yet strong. They can handle any temperature changes. Most of the people, who live in areas that have extreme climatic conditions, use PEX plumbing systems these days. If you are looking for the same, this content is right for you.

Firstly, you need copper manifolds for the installation of the plumbing system. There are different types of PEX available in the market these days, from which you can choose the right ones. When you are buying PEX manifolds, it is very important to consider your plumbing needs. You should know the exact number of pipes in the plumbing system. The ports of the Everhot manifolds vary from one another.  For instance, there are manifolds that come with even five ports. So choose the best for you. Once you have selected the right PEX manifolds, choosing the right size of PEX pipes is important.

You should choose good quality Zurn manifolds and pipes. This will provide you a durable plumbing system at your home that can withstand any type of harsh climatic conditions. Moreover, you do not have to worry about the damages that are caused due to chemical attacks.  All these factors make PEX manifolds and pipes as an excellent material for both cold and hot water applications. PEX and pipes are also best for underground cold-water applications. Moreover, the plumbing system that are made using PEX are also suitable for all types of homes and buildings.

Therefore, if you are looking for an efficient plumbing system for your home, PEX could be the best option for you. You just need PEX, pipes and tools for the installation process. If you have some basic technical knowledge, you will be able to install the system completely without any help. However, incase, if you are new and find it hard to install the Wisbro manifolds or pipes, you can take the assistance of different plumbing experts, who operate in the market.

Tags: , , , ,

A guide to properly design and install Radiant Floor Heating

Dec 2

Posted by Edmundo Plumber in heat exchangers, Radiant Heating | Comments off

The designing and the layout of the concrete floors for installation of radiant floor heating system is intricate, thereby requiring certified professionals for getting the same done. This is because loads of planning and effective teamwork are a must for successful completion of the process. We hereby attempt to provide you with certain basic guidelines that can help you as homeowners in ensuring that the system is properly installed.

Manifold + thermostat + control

Get adequate product knowledge: The more knowledge you have about the entire system, the easier it will be for you to communicate your requirements to the designers.

Finding the best man for the job: This is an intricate work that requires specialized professionals .Hence, it is imperative for you to find the very best designer and installer to work in a combined effort to complete the work.

Teamwork – the vital essence for success: In order to install the very best Radiant Floor Heating system, it is vital that effective communication and healthy coordination exists between the general and concrete contractors, the architect as well as the installer.

Gather knowledge on the effect of flooring on heat transfer: The radiant heating system can only be considered to be successful provided adequate amount of heat is transferred in an efficient manner through the concrete, whatever is its thickness, and then again the floor opening that is placed on its top. In fact, during the planning stage itself one should consider factors like the loss of heat, the floor areas that would not be accessible to the heat (because of pre-installed items on them) and also the factors that cause resistance to the transfer of heat like the coverings on the floor. It is advisable to have the system installed using conducive mediums so as to ensure greater and more efficient installation of the heat that is generated.

Having access to the right controls for operating the system: To ensure that you get the best of comforts as well as efficiency in energy usage while using radiant heating, there is a need to have an efficient control system for maintaining the room temperature at desired levels as well as keeping the operating temperature below the top limits that have been specified for that particular flooring type. If the climate in your area calls for modest heating requirements and has just some minor fluctuations of temperature, a simple thermostat provided in the radiant system will suffice adequately. However, if you live in colder regions with greater temperature variations, you will need to have access to sophisticated controls, equipped with special sensors for monitoring the outside temperature and its difference from the room temperature and other such factors that would help communicate the extent of heating required.

Planning to have the warm floor system into your home, be sure to have the above guidelines embedded into your mind.

Tags: ,

Why PEX Tubing is the Best Choice for Radiant Heating Systems?

Dec 2

Posted by Edmundo Plumber in Radiant Heating | Comments off

It is very important for homes to be warm and cozy in the winter season and this especially in places, which face a harsh and bitter winter. While rising awareness among people about the environment and it’s conservation has lead to people opting for less damaging home heating systems like radiant heating, a little fact about the system is that it was used by the Romans to keep their bathhouses warm and comfortable. As most people are aware in Radiant heating systems the radiant energy is generated from beneath and from within the floor panels. Most home heating systems heat the air and then force it to circulate in the room, while with radiant heating, the surfaces are heated and the warmth air rises to keep the room warm and inviting.

Radiant heating saves energy as the air does not have to be constantly reheated, as is the case with Convection heating. When radiant heating was first introduced in residential heating, water was stored in copper pipes to be heated to pass the heat from the floor. This was very expensive and the copper pipes have a tendency to break. This made radiant heating a not very taken option when it came to home heating systems and it was not until the introduction of high-density polyethylene pipes were introduced that the home heating system became popular again. Extrusion process is used in the manufacture of PEX from tubes ¼ to 2 inches in diameter. PEX pipes are sold in coils as well as straight lengths. It is cheaper to repair PEX pipes, they are easier to replace and they are also one hundred percent biodegradable.

Another factor should be kept in mind if using PEX tubing for radiant heating. This is the presence of an oxygen barrier in the tubing if there are certain ferrous compounds in the system. Ferrous compounds may be present in the form of a boiler made with ferrous compounds, which may be susceptible to rust. The installation cost of setting up PEX radiant heating has come down considerably over the years with the manufacture of lightweight, robust equipment as well as precut PEX tubing, which can be readily fitted into the floor panels. The invention of PEX tubing has made it possible and affordable for all to install radiant heating systems in their homes without paying through their nose or without much disruption to everyday life

Tags:

The role of PEX tools in plumbing

Dec 2

Posted by Edmundo Plumber in Plumbing supplies | Comments off

PEX has obtained a reputed forename in the pitch of providing answer for total plumbing commodities. They have excellent superiority of PEX tools in reasonable cost. The choice of PEX equipments are strong and are particularly designed for the consumer’s convenience. They have new Watts Radiant’s CrimpAll tool by which one can fold four volume of PEX tube. This flexible crimp tools crimps all 3/8″, 5/8″, 1/2 “and 3/4″of fittings of PEX Crimp ring. The entire PEX apparel contains the Crimp All instrument with 4 jaw set volumes, rugged tool casing, adjustment equipments, and “go/no-go” measure. It employs rings of Black Copper in grouping with PEX compress or crimp fixtures to make links additional one” Crimp tool be able to be employed for crimping one” PEX.

The PEX tools make links for PEX Tubes amid the Hydro PEX clamps of a variety of volumes. The Hydro PEX compress implement works with stainless steel clamp. This instrument also is referring to as one PEX crimping rings. While used through the good stainless steel clamp, this PEX Clamp instrument can create 5/8″, 3/4″,3/8″, 1/2″,  in addition to 1″ PEX Tube links. Through its racketing design, press tool ensures a total press connection all time. The apparatus cannot be unlocked until this fitting has always been properly hard-pressed. The PEX suitable rechargeable battery motorized cutter can formulate Viega press scheme links in 3/8” from side to side 1” extent. This comes with 2 batteries, the charger, and a long-lasting carrying container. The apparel is obtainable with or with no jaws for the customer’s convenience. Identical ProPress jaws also are obtainable through Ridge device distribution.

In the Pro PEX expander tools category they have an extensive range of models. There are the air expander devices, guidebook expander PEX along with several replicas of battery expander equipment. Which all require applies of Wirsbo Pro PEX fixtures and Wirsbo Pro PEX loops. Wirsbo 1″ of Copper Valve Manifolds attribute 1/2″ Pro PEX channels. A soldered regulator connection permits for simple as well as easy remoteness of individual rings. Copper Manifold segments can sweat collectively to expand the numeral outlets with a criterion 1-inch copper combination.

Tools for PEX plumbing multiples should be employed to simplify the fittings of the PEX Plumbing system. In PEX plumbing systems, the manifolds operate as a centre for water transport. These manifolds comprise the MANABLOC multiple structure, Wirsbo Aquacenter manifold, and copper manifold. All need to select the right fittings as well as adapters.

Tags: , ,